The CS-230 is an all electric injection molding machine designed and manufacturered by TOYO machinery & metal co., Ltd. Equipped with the latest control system 600, the new CS series of TOYO all electric injection molding machine provides a variety of enhanced functions including improved mold production and operation supporting functions such as mold condition analyzing amd molding navigation, which make it one of the best choice for proucers of medical parts and thin-wall containers for dairy products.
| PARAMETER | UNIT | CS-230 | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| INJECTION UNIT | FH400C | FH400CP | H370C | ||||||||||||||
| A | B | C | D | A | B | C | D | A | B | C | D | E | |||||
| Screw diameter | mm | 32 | 36 | 40 | 46 | 32 | 36 | 40 | 46 | 40 | 46 | 50 | 55 | 60 | |||
| Max. Injection pressure | MPa | 264.0 | 250.0 | 215.6 | 166.6 | 274.5 | 250.0 | 235.0 | 176.4 | 244.0 | 233.0 | 235.0 | 196.0 | 166.0 | |||
| Injection Rate | cm3/s | 402 | 510 | 628 | 831 | 241 | 306 | 376 | 498 | 251 | 332 | 393 | 475 | 565 | |||
| Max. Injection Speed | mm/s | 500 | 300 | 200 | |||||||||||||
| CLAMPING UNIT | |||||||||||||||||
| Clamping force | kN | 2254 | |||||||||||||||
| Clamping Stroke | mm | 550 | |||||||||||||||
| Dist. between tie bars (HxV) | mm | 610 x 610 | |||||||||||||||
High response of SYSTEM 600 control and specially set two torque monitoring areas combined, the HSP (High Sensitive Protection) mold protection system greater performance in protecting the mold from damage due to product pinching between mold halves. Mold protection accuracy has been much improved even in high cycle operation, so that cycle time can be shortened without concern for any damage to the mold.
By comparing operator-set molding parameters with the stored reference data*, this analyzing function finds out setting problems and displays advice for correction, so that an operator can set proper molding conditions in a short time.
Automatic identification of setting problems
Corrective advice on the screen
The clamping unit of the SI-6 series is equipped with various technologies such as "V-clamp" developed in collaboration with Kyoto University, and basic specification such as tie-bar clearance and ejector stroke are enhanced.
This system guides an operator step-by-step along the setting process of molding parameters based on the basic setting principle.
This function is helpful not only for novice operators not accustomed to Toyo molding machines but for molding experts to recall the basic
setting method.
The mold-clamping unit employs the V-shaped toggle mechanism, the V-clamp, and die-plates, both of which have been developed in collaboration with Kyoto University. Owing to the center-press effect, the V-clamp provides well-balanced and uniformed surface pressure over the mold, realizing ideal mold clamping. The die-plates are optimally designed so that they can be slim but have high rigidity.
