sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2118 |
| Shot weight | g | 2019 |
| Shot speed | mm/s | 194 |
| Screw diameter | mm | 85 |
| Injection pressure | MPa | 122 |
| Screw L:D ratio | -- | 20.7 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4380 |
| Opening Stroke | mm | 740 |
| Space between tie bars | mm x mm | 765 x 765 |
| Mold thickness(min) | mm | 280 |
| Mold thickness(max) | mm | 780 |
| Hydraulic ejection stroke | mm | 170 |
| Hydraulic ejection force | kN | 90 |
| POWER UNIT | ||
| Pump motor | kW | 45 |
| Heating capacity | kW | 33.6 |
| GENERAL | ||
| Oil tank capacity | L | 750 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 7550 mm |
| B | 3975 mm |
| C | 70 mm |
| D | 510 mm |
| E | 60 mm |
| F | 200 mm |
| G | 800 mm |
| H | 800 mm |
| I | 800 mm |
| J | 1225 mm |
| K | 300 mm |
| L | 1455 mm |
| M | 1545 mm |
| N | 200 mm |
| O | 60 mm |
| P | 870 mm |
Powerjet Machinery onshow their high speed hydraulic injection molding machine KF268-S8 with a 2 cavities top entry IML Solution for Lids.
KF268-S8 is a high speed hydraulic injection molding machine designed by PowerJet machinery for thin-wall food containers high speed production. The new machine onshow is equiped with a 2 cavities top entry IML Solutions for Lids to provide customer a turn-key IML Solutions. With built in Arabic languge interface, it's an ideal choice for IML Lids production of lids.
To maximize the productivity of this machine, a side entry IML Solutions would be a more rewarding investment with more cavities mould. For the production of containers without IML a high speed injection robot SW7112DS would be a price smart choice.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
SWITEK Injection Robot SW6310-20 for injection molding machine 150 ~ 320 T with a payload up to 3kg.
SWITEK Injection Robot SW6308D-20 for injection molding machine 50 ~ 250 T with a payload up to 3kg.
Injection Machinery News & Express
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
Automation Solutions
