sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
sales06@switek.biz
+86 186 5927 5869
Subscribe to Us
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 1779 |
| Shot weight | g | 1299 |
| Shot speed | mm/s | 320 |
| Screw diameter | mm | 80 |
| Injection pressure | MPa | 186 |
| Screw L:D ratio | -- | 24 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5000 |
| Opening Stroke | mm | 850 |
| Space between tie bars | mm x mm | 920 x 920 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 920 |
| Hydraulic ejection stroke | mm | 260 |
| Hydraulic ejection force | kN | 96 |
| POWER UNIT | ||
| Pump motor | kW | 194 |
| Heating capacity | kW | 43 |
| GENERAL | ||
| Oil tank capacity | L | 820 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 292 mm |
| B | 0 mm |
| C | 0 mm |
| D Max | 2193 mm |
| E | 4797 mm |
| L | 9225 mm |
| M Min | 8990 mm |
BOLE Machinery new injection molding machine BL530EKH/C4000 installated in Thailand in production of motorcycle accessories produced of ABS material.
As one of the top 10 injection molding machine manufacturer from China, the EKH series Hydraulic servo energy saving injection molding machine produced by BOLE proved a 100% clamping force efficiency with BOLE central clamping toggle design compared to traditional edge clamping force of only 80~85%. The EKH series of injection molding machine is the key products of BOLE machinery for the car-parts injection industry.
To increase the production efficiency and the production safety, the injection robot recommended for BOLE EKH series of injection molding machine would be SWITEK SW6 series injection robot. With a payload from 3~15kg, SWITEK SW6 series injection robot is a perfect match of BOLE EKH series of injection molding machine in production of car-parts in parts picking, runner cutting, in mold insertion etc.
Contate a SWITEK IML
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
HuangYanZheng©Copy Right
