sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 617 |
| Shot weight | g | 562 |
| Shot speed | mm/s | 167 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 215 |
| Screw L:D ratio | -- | 25.2 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3000 |
| Opening Stroke | mm | 610 |
| Space between tie bars | mm x mm | 730 x 730 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 680 |
| Hydraulic ejection stroke | mm | 160 |
| Hydraulic ejection force | kN | 69 |
| POWER UNIT | ||
| Pump motor | kW | 71 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Machine Dimension
Platen Dimension
Arge Automation double arms top entry IML solutions for 1 cavity bucket synchronous IML production
For double arms top entry IML solutions it's mostly a solution for the production of IML Lids to have a synchronous parts picking and labeling for a higher production efficiency but not increase the size of the injection molding machine too much. To have a double arms top entry IML solution for the production of IML bucket is a brave adenture in system design because an injection molding machine with sufficient opening stroke will increase the cost of the system dramatically.
A better solution for efficient IML production of IML production would be a Side Entry IML Robot which will have a much better consistence of the parts and much shorter in mold time for a higher productivity. Any, ARGE have a double arms top entry IML robot for the production of IML buckets is a new try and provide more opportunities to the small and medium size IML buckets producers.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
Injection Machinery News & Express
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
Automation Solutions
