WELLTEC SeIII Series Servo-driven Energy Saving Injection Molding Machine -- 480SeIII
About the WELLTEC 480SeIII
The 480SeIII is a servo-driven energy saving injection molding machine suitable for general purpose and engineering plastics moulding designed and
manufactured by WELLTEC Machinery Ltd., the benchmark for high-performance injection moulding machine.
Parameters of the WELLTEC 480SeIII Servo-driven Energy Saving Injection Moulding Machine
| MODEL |
|
480SeIII |
|
|
4800-3508 |
| INJECTION UNIT |
UNIT |
A |
B |
C |
| Screw diameter |
mm |
70 |
80 |
94 |
| Screw ratio |
L/D |
24.2 |
21.2 |
18 |
| Injection Rate |
cm3/s |
352 |
460 |
636 |
| Injection pressure |
MPa |
228 |
174 |
126 |
| Clamping force |
Ton |
480 |
| Clamping Stroke |
mm |
780 |
| Space between Tie bar (H x V) |
mm |
820 x 800 |
Dimensional Drawing of WELLTEC 480SeIII Injection Molding Machine
| Model |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
| 480SeIII |
2246 |
1985 |
2336 |
7006 |
8025 |
1797 |
1874 |
855 |
800 |
942 |
937 |
Suitable Injection Automation Applications
Features of the SeIII Series High-performance Injection Molding Machine
-
Clamping Unit
- Extra durability achieved through optimised clamping structure
- Optimised platen design to disperse stress
- Accurate pause and smooth and speedy movement supported by strengthened toggle
- High pressure lubrication system adopted in clamping unit to support machine protection during high speed production
- The toggle's special heat-treated steel case enables higher wear resistance
- High-rigidity frame supports smooth movement
-
Injection Unit
- Newly optimized injection unit design to enable various production needs
- Diagonally located cylinders to facilitate better stress distribution
- Linear guide rail significantly reduces mechanical wear and tear (90-850SeIII)
-
Hydraulic System
- Efficient and stable servo hydraulic system
- Minimised energy loss attained through the advanced hydraulic pipeline design
- Low-noise
- Advanced servo pump improves machine performance
-
Software & Functions
- High performance European B&R control system
- 10.4" TFT color LCD display
- Users can identify the changes of parameter and sources of the changes
- Parameter data statistics for quality control
- Auto control of temperature by PID
- Mould parameter can be stored in USB devices and used in another injection moulding machine
- Remote motoring of parameter and operation sequence by MODEM or Ethernet
- Multi-languange selection
