sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 735 |
| Shot weight | g | 0 |
| Shot speed | mm/s | 160 |
| Screw diameter | mm | 60 |
| Injection pressure | MPa | 193 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4500 |
| Opening Stroke | mm | 800 |
| Space between tie bars | mm x mm | 770 x 770 |
| Mold thickness(min) | mm | 400 |
| Mold thickness(max) | mm | 820 |
| Hydraulic ejection stroke | mm | 180 |
| Hydraulic ejection force | kN | 98 |
| POWER UNIT | ||
| Pump motor | kW | 166 |
| Heating capacity | kW | 0 |
| GENERAL | ||
| Oil tank capacity | L | 280 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 8623 mm |
| B | 1614 mm |
| C | 610 mm |
| D | 251 mm |
| E | 2135 mm |
| F | 4 x M10 L20 |
| G | 115 mm |
| H | 149 mm |
| J | φ80 mm |
| K | 115 mm |
| L | 184 mm |
| M | φ4 mm |
| N | SR10 |
ARGE 3 axis servo top entry IML robot installed for the production of 20L IML paints bucket.
To reduce the cost of the IML system especially the injection molding machine, ARGE adopted a two step IML solutions simliar to which is popular among the top entry IML solutions for buckets by SWITEK which will have the buckets picking and labeling done asynchronous instead of synchronous to have the IML buckets produced by a smaller injection molding machine to reduce the investment of the machinery.
As an IML System provider since 2009, SWITEK Automation is continuing providing high performace IML Solutions of both top entry and side entry to clients around the world as a perfect subsition to low budget IML projects against the European IML solutions provider to make the small IML business profitable.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
SWITEK Injection Robot SW6308D-20 for injection molding machine 50 ~ 250 T with a payload up to 3kg.
SWITEK Injection Robot SW6310-20 for injection molding machine 150 ~ 320 T with a payload up to 3kg.
Injection Machinery News & Express
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
Automation Solutions
