sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 397 |
| Shot weight | g | 362 |
| Shot speed | mm/s | 196 |
| Screw diameter | mm | 45 |
| Injection pressure | MPa | 228 |
| Screw L:D ratio | -- | 23.5 |
| CLAMPING UNIT | ||
| Clamping force | kN | 1780 |
| Opening Stroke | mm | 450 |
| Space between tie bars | mm x mm | 485 x 465 |
| Mold thickness(min) | mm | 180 |
| Mold thickness(max) | mm | 520 |
| Hydraulic ejection stroke | mm | 130 |
| Hydraulic ejection force | kN | 70 |
| POWER UNIT | ||
| Pump motor | kW | 19 |
| Heating capacity | kW | 16.3 |
| GENERAL | ||
| Oil tank capacity | L | 220 |
Robot Installation
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 5900 mm |
| B | 3000 mm |
| C | 595 mm |
| D | 370 mm |
| E | 60 mm |
| F | 1750 mm |
| G | 1100 mm |
| H | 1150 mm |
| I | 724 mm |
| J | 2100 mm |
| K | 4220 mm |
| L | 1740 mm |
| M | 950 mm |
| N | 990 mm |
| O | 1430 mm |
SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.
For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
Injection Machinery News & Express
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
Automation Solutions
