Systec 420/820 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	530
Shot weight	g	482
Shot speed	mm/s	510
Screw diameter	mm	50
Injection pressure	MPa	243
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	4200
Opening Stroke	mm	770
Space between tie bars	mm x mm	820 x 820
Mold thickness(min)	mm	380
Mold thickness(max)	mm	825
Hydraulic ejection stroke	mm	230
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	137
Heating capacity	kW	32.2
GENERAL
Oil tank capacity	L	820

Platen Dimension

Machine Dimmension

#	Value
A	257 mm
B	-3 mm
C	1105 mm
D Max	1795 mm
G	2469 mm
M	8025 mm
F Min	1243 mm
S	305 mm
SH	2291 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions