Systec 350/720 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1212
Shot weight	g	1103
Shot speed	mm/s	380
Screw diameter	mm	70
Injection pressure	MPa	188
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	3500
Opening Stroke	mm	730
Space between tie bars	mm x mm	720 x 720
Mold thickness(min)	mm	350
Mold thickness(max)	mm	745
Hydraulic ejection stroke	mm	200
Hydraulic ejection force	kN	73
POWER UNIT
Pump motor	kW	132
Heating capacity	kW	27
GENERAL
Oil tank capacity	L	580

Platen Dimension

Machine Dimmension

#	Value
A	287 mm
B	809 mm
C	936 mm
D Max	1682 mm
G	2408 mm
M	7761 mm
F Min	1474 mm
S	546 mm
SH	1852 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions