sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 258 |
| Shot weight | g | 237 |
| Shot speed | mm/s | 500 |
| Screw diameter | mm | 40 |
| Injection pressure | MPa | 253 |
| Screw L:D ratio | -- | 22:1 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2000 |
| Opening Stroke | mm | 500 |
| Space between tie bars | mm x mm | 520 x 520 |
| Mold thickness(min) | mm | 200 |
| Mold thickness(max) | mm | 550 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 55 |
| POWER UNIT | ||
| Pump motor | kW | 17 |
| Heating capacity | kW | 16 |
| GENERAL | ||
| Oil tank capacity | L | 130 |
Platen Dimension
Machine Dimmension
JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.
In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.
To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
Injection Machinery News & Express
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
Automation Solutions
