JU9000III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2863
Shot weight	g	2605
Shot speed	mm/s	693
Screw diameter	mm	90
Injection pressure	MPa	161
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	9000
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1180 x 1000
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	75
Heating capacity	kW	54
GENERAL
Oil tank capacity	L	730

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2398 mm
B	2286 mm
C	2825 mm
D	2265 mm
E	1627 mm
F	1577 mm
G	1203 mm
H	1027 mm
I	544 mm
J	4512 mm
K	4586 mm
M	3857 mm
N	1740

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions