JU9000III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2262
Shot weight	g	2058
Shot speed	mm/s	548
Screw diameter	mm	80
Injection pressure	MPa	204
Screw L:D ratio	--	24.8
CLAMPING UNIT
Clamping force	kN	9000
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1180 x 1000
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	75
Heating capacity	kW	54
GENERAL
Oil tank capacity	L	730

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2398 mm
B	2286 mm
C	2825 mm
D	2265 mm
E	1627 mm
F	1577 mm
G	1203 mm
H	1027 mm
I	544 mm
J	4512 mm
K	4586 mm
M	3857 mm
N	1740

SWITEK Turn-key 8 Cavities Cups Side Entry IML Solutions with Vision Control + Packing Solutions

Starting from $285,714

GECH IML on show turn-key IML solutions of 8 cavities Yogurt cups high speed IML production with vision control at a cycle time of 5.5s with YZY IML label and Brosen Mold by Welltec high speed injection molding machine TTI-353Sec.

The IML system is in production of Yogurt cups with a containing capacity of 100g, which is one of the most popular design of extreme thin-wall container with a thickness of 0.55mm for dairy products. And the total cycle time of 5.5s will promise the productivity of the system. It's no doubt that GECH IML has done a great job in this solutions.

The counter part of the GECH 8 cavities cups side entry IML solution, SWITEK IML Solutions in production provided not noly the vision control but also packing solutions to the IML cups producers. As a system for the production of food package, the prevention of secondary polution tend to be very important to ensure the food safety. So a system free from humam contact from injection to packing is no doubt an ideal solution.

Turn-key IML Solutions