JU7500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2354
Shot weight	g	2142
Shot speed	mm/s	755
Screw diameter	mm	90
Injection pressure	MPa	126
Screw L:D ratio	--	17.8
CLAMPING UNIT
Clamping force	kN	7500
Opening Stroke	mm	1400
Space between tie bars	mm x mm	1110 x 960
Mold thickness(min)	mm	450
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	65
Heating capacity	kW	39
GENERAL
Oil tank capacity	L	520

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2208 mm
B	2106 mm
C	2366 mm
D	2200 mm
E	1506 mm
F	1354 mm
G	1078 mm
H	902 mm
I	675 mm
J	4055 mm
K	3707 mm
M	3450 mm
N	1607

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions