JU6500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1239
Shot weight	g	1128
Shot speed	mm/s	510
Screw diameter	mm	70
Injection pressure	MPa	157
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	6500
Opening Stroke	mm	1350
Space between tie bars	mm x mm	1040 x 910
Mold thickness(min)	mm	400
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	55
Heating capacity	kW	33
GENERAL
Oil tank capacity	L	450

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2327 mm
D	2200 mm
E	1290 mm
F	1290
G	1082 mm
H	903 mm
I	675 mm
J	3746 mm
K	3707 mm
M	3191 mm
N	1560

Turn-key 2 Cavities Pails IML Solution with Handle Assembly

Starting from $132,857

Chinaplas 2024 -- Yizumi successfully run the turn-key 2+2 cavities 1L pails IML system with handle assembly at the cycle time of 6.5s and in mold time 1.77s, attracted the attention of visitors from around the world.

Well prepared for the show, YIZUMI system supassed its counter parts of the similar solutions in Chinaplas in both smoothness of running and the cycle time. With the increased popularity of the IML pails with handle among the dairy producers, the IML solutions with the handle assembly for pails is no double would the the top choice for the contnainer producers to increase their productivity and reduce the production cost.

The high lights of the system is that to have the handle and pails in the same mold, the package producer will need only one sets of machinery to produce the IML pails with handle well assembled instead of two. It's an economic and eco-friendly solution of IML pails with handle production.

Turn-key IML Solutions