Two Platen Injection Molding Machine FA1200 -- LK Technology Holidings Limited

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	5224
Shot weight	g	4754
Shot speed	mm/s	1235
Screw diameter	mm	110
Injection pressure	MPa	177
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	12000
Opening Stroke	mm	2100
Space between tie bars	mm x mm	1300 x 1200
Mold thickness(min)	mm	600
Mold thickness(max)	mm	1300
Hydraulic ejection stroke	mm	400
Hydraulic ejection force	kN	490
POWER UNIT
Pump motor	kW	216
Heating capacity	kW	62
GENERAL
Oil tank capacity	L	1800

Platen Dimension

Machine Dimmension

#	Value
A	3491 mm
B	1783 mm
C	1708 mm
D	1530 mm
E	1530 mm
F	2700 mm
G	2100 mm
H	1549 mm
I	2232 mm
J	1739 mm
K	1956 mm
L	2764 mm
M	2264 mm
N	2568 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions