sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 181 |
| Shot weight | g | 167 |
| Shot speed | mm/s | 162 |
| Screw diameter | mm | 38 |
| Injection pressure | MPa | 125 |
| Screw L:D ratio | -- | 18 |
| CLAMPING UNIT | ||
| Clamping force | kN | 900 |
| Opening Stroke | mm | 320 |
| Space between tie bars | mm x mm | 355 x 325 |
| Mold thickness(min) | mm | 125 |
| Mold thickness(max) | mm | 360 |
| Hydraulic ejection stroke | mm | 70 |
| Hydraulic ejection force | kN | 34 |
| POWER UNIT | ||
| Pump motor | kW | 15 |
| Heating capacity | kW | 5.4 |
| GENERAL | ||
| Oil tank capacity | L | 120 |
Platen Dimension
Machine Dimmension
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
Turn-key IML Solutions
Turn-key Pipe Fittings Injection Automation Solutions
Turn-key Cutlery Packing Automation Solutions
High Performance Injection Robot
Injection Machinery News & Express
E-mail: sales@switek.biz
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
Automation Solutions
