EL280/430 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	201
Shot weight	g	182
Shot speed	mm/s	200
Screw diameter	mm	40
Injection pressure	MPa	216
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	2800
Opening Stroke	mm	600
Space between tie bars	mm x mm	730 x 730
Mold thickness(min)	mm	300
Mold thickness(max)	mm	750
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	60
POWER UNIT
Pump motor	kW	24
Heating capacity	kW	12.52
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	6292 mm
B	1047 mm
C	1576 mm
D	380 mm
E	1463 mm
F	301 mm
G	1821 mm
H	2226 mm
I	φ100 mm
J	φ3 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions