EL130/260 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	129
Shot weight	g	116
Shot speed	mm/s	200
Screw diameter	mm	36
Injection pressure	MPa	209
Screw L:D ratio	--	19.5
CLAMPING UNIT
Clamping force	kN	1300
Opening Stroke	mm	400
Space between tie bars	mm x mm	510 x 460
Mold thickness(min)	mm	150
Mold thickness(max)	mm	550
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	34
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	8.22
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5292 mm
B	818 mm
C	1414 mm
D	310 mm
E	1260 mm
F	291 mm
G	1568 mm
H	2013 mm
I	φ100 mm
J	φ3 mm

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions