EL100/160 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	59
Shot weight	g	54
Shot speed	mm/s	200
Screw diameter	mm	26
Injection pressure	MPa	273
Screw L:D ratio	--	21
CLAMPING UNIT
Clamping force	kN	1000
Opening Stroke	mm	360
Space between tie bars	mm x mm	465 x 405
Mold thickness(min)	mm	150
Mold thickness(max)	mm	510
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	25
POWER UNIT
Pump motor	kW	15
Heating capacity	kW	6.42
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	4710 mm
B	717 mm
C	1219 mm
D	290 mm
E	1207 mm
F	291 mm
G	1500 mm
H	1960 mm
I	φ100 mm
J	φ2.6 mm

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions