560 SEIII A -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2212
Shot weight	g	1991
Shot speed	mm/s	161
Screw diameter	mm	80
Injection pressure	MPa	215
Screw L:D ratio	--	23.6
CLAMPING UNIT
Clamping force	kN	5600
Opening Stroke	mm	880
Space between tie bars	mm x mm	860 x 840
Mold thickness(min)	mm	350
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	240
Hydraulic ejection force	kN	166
POWER UNIT
Pump motor	kW	385
Heating capacity	kW	35.73
GENERAL
Oil tank capacity	L	1000

Platen Dimension

Machine Dimmension

#	Value
A	2220 mm
B	2085 mm
C	2545 mm
D	7643 mm
E	8903 mm
F	2193 mm
G	1791 mm
H	1420 mm
I	850 mm
J	960 mm
K	895.5 mm

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions