530 SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2799
Shot weight	g	2519
Shot speed	mm/s	148
Screw diameter	mm	90
Injection pressure	MPa	170
Screw L:D ratio	--	21
CLAMPING UNIT
Clamping force	kN	5300
Opening Stroke	mm	850
Space between tie bars	mm x mm	840 x 830
Mold thickness(min)	mm	300
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	240
Hydraulic ejection force	kN	166
POWER UNIT
Pump motor	kW	352
Heating capacity	kW	35.73
GENERAL
Oil tank capacity	L	700

Platen Dimension

Machine Dimmension

#	Value
A	2244 mm
B	2005 mm
C	2495 mm
D	7846 mm
E	8995 mm
F	1809 mm
G	1900 mm
H	865 mm
I	800 mm
J	945 mm
K	950 mm

Turn-key 20L Pail Side Entry IML Solutions

K-Fair 2016, LK Machinery on show two-platen injection molding machine Forza PT450H with side entry IML Solutions of single cavity pails.

As a deep cavity product, it'll request a larger opening stroke of the injection molding machine. To have the larage bucket produced by a two-platen injection molding machine will occupy less floor space. As an injection molding machine manufacuturing company founded in 1979, LK FORZA series two-platen injection molding machine is one of the top two-platen injection molding machines available in the market.

For large size pails like 20L/33L, the more economic solution would be a Top Entry IML Solution, compared to the side entry one, a top entry IML system will have a lower purchasing cost and because the robot is to be installed to the top of the injection molding machine, it'll occupy less floor space compared to the side entry IML Solution. With the first IML robot on show Chinaplas 2009, SWITEK is now providing both top & side entry IML solutions for large size containers to clients around the world.

Turn-key IML Solutions