480 SEIII B -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2011
Shot weight	g	1830
Shot speed	mm/s	170
Screw diameter	mm	80
Injection pressure	MPa	174
Screw L:D ratio	--	21.2
CLAMPING UNIT
Clamping force	kN	4800
Opening Stroke	mm	780
Space between tie bars	mm x mm	820 x 800
Mold thickness(min)	mm	300
Mold thickness(max)	mm	820
Hydraulic ejection stroke	mm	240
Hydraulic ejection force	kN	166
POWER UNIT
Pump motor	kW	275
Heating capacity	kW	35.04
GENERAL
Oil tank capacity	L	700

Platen Dimension

Machine Dimmension

#	Value
A	2246 mm
B	1985 mm
C	2336 mm
D	7006 mm
E	8025 mm
F	1797 mm
G	1874 mm
H	855 mm
I	800 mm
J	942 mm
K	937 mm

SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.

For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.

Turn-key IML Solutions