Servo Hydraulic Injection Molding Machine 260 SEIII A -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	713
Shot weight	g	649
Shot speed	mm/s	175
Screw diameter	mm	55
Injection pressure	MPa	211
Screw L:D ratio	--	22.9
CLAMPING UNIT
Clamping force	kN	2600
Opening Stroke	mm	600
Space between tie bars	mm x mm	580 x 580
Mold thickness(min)	mm	195
Mold thickness(max)	mm	610
Hydraulic ejection stroke	mm	195
Hydraulic ejection force	kN	111
POWER UNIT
Pump motor	kW	172
Heating capacity	kW	18.9
GENERAL
Oil tank capacity	L	480

Platen Dimension

Machine Dimmension

#	Value
A	1961 mm
B	1757 mm
C	2185 mm
D	5030 mm
E	6072 mm
F	1417 mm
G	1462 mm
H	810 mm
I	800 mm
J	852 mm
K	731 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions