Servo Hydraulic Injection Molding Machine 130SEIII -- Welltec Machinery Ltd.

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	251
Shot weight	g	229
Shot speed	mm/s	205
Screw diameter	mm	40
Injection pressure	MPa	172
Screw L:D ratio	--	20.5
CLAMPING UNIT
Clamping force	kN	1300
Opening Stroke	mm	430
Space between tie bars	mm x mm	410 x 410
Mold thickness(min)	mm	145
Mold thickness(max)	mm	450
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	41
POWER UNIT
Pump motor	kW	72
Heating capacity	kW	9.3
GENERAL
Oil tank capacity	L	200

Platen Dimension

Machine Dimmension

#	Value
A	1700 mm
B	1486 mm
C	1936 mm
D	3878 mm
E	4586 mm
F	1104 mm
G	1203 mm
H	650 mm
I	800 mm
J	660 mm
K	601.5 mm

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions