SWITEK SW6 Series 5 Axis Servo Robotic Arm for Injection Molding Machine 80~450T

The SWITEK SW6 series of double standard arms 5 axis servo robot are designed for injection molding machine with clamping force 800~4500kN with a payload 3kg or 8kg. The standard configuration of this robot is a main arm for parts picking and a sub-arm for sprue picking in a 3 plates injection molding project. It can also be configured as a double main arms 5 axis servo robot for parts picking in a stack mold injection molding project. The injection automation application of a double arms 5 axis servo robotic arm include:

3 Plates mold injection molding project parts & sprue picking application.
Stacking mold injection molding project parts picking application.
Double arms robotic arm top entry IML solutions for lids.
Double arms robotic arm in mold insertion injection automation solutions.
Double arms robotic two tones injection molding application solutions.

SWITEK 5 Axis Servo Robotic Arm Top Entry IML Solutions for Lids

robotic arms for Haitian injection molding machine

No.	Name	SW6308	SW6310	SW6710	SW6712
1	X1	980mm	980mm	1055mm	1055mm
2	X2	630mm	640mm	607mm	607mm
3	X3	165mm	165mm	288mm	288mm
4	X4	645mm	645mm	607mm	607mm
5	Y	800mm	1000mm	1000mm	1200mm
6	Z	1280mm	1700mm	1750mm	1750mm
7	YM1	235mm	235mm	420mm	420mm
8	YM2	565mm	765mm	580mm	780mm
9	W	1500m	1500mm	1700mm	1700mm
10	L	2320mm	2640mm	2340mm	2340mm
11	H	1690mm	1930mm	2190mm	2460mm
12	Hs	380mm	380mm	580mm	580mm
13	Payload/kgs	3kg	3kg	8kg	8kg

Q & A ABOUT SWITEK SW6 SERIES DOUBLE STANDARD ARMS 5 AXIS SERVO ROBOT FOR INJECTION MOLDING MACHINE

Will the SW6 Series Double Standard Arms Robot for Injection Molding Machine to be Equipped with EU67 Interface?
For the interface of the SWITEK SW6 series double standard arms robot will custom make the EU12/EU67/JIS interface according to the interface of the injection molding machine.
What to be Taken Into Consideration when You Ordering a Double Arms 5 Axis Servo Robot?
The SWITEK SW6 series of double standard arms robots are designed for the 3 plates or stack mold injection molding project. But for the 3 plates mold injection molding project the robot should be a main arm + sub-arm configuration while for stack mold project it would be double main arms configuration. And if there's any special requirement it must be clarified before the order confirmation.
What's Would be the Key Parameters for the Selection of a Robotic Arm for an Injection Automation Project?
The key paramerters of robotic arm selecting for an injection automation project includes:
- The distance from the mold center to the mounting point of the robotic arm to ensure that the robot can pick the parts from the mold.
- The height of the safe door to ensure that the EOAT of the robotic arm can get out of the injection molding machine.
- The distance from the mold center to the conveyor to ensure that the parts can be dropped to the correct place.
- The weight of the parts and EOAT to ensure that the robotic arm has sufficient loading capacity and ensure a safe picking.
To simplify the parameters preparation please contact the sales of SWITEK for detailed datasheet collecting form for the robotic arm.